LOTUS 1-2-3 VERSION 2.3
-----------------------

The following are generic instructions for the installation of TLI
text and graphics drivers for Lotus 1-2-3 Version 2.3. Lotus should
first be installed for normal VGA and it is suggested that normal
operation be assured before loading TLI extended mode drivers

1) Copy the files from the Lotus Driver Diskette to another diskette,
placing all driver files in the same directory for the program to
locate them during the installation process.

2) Enter Lotus INSTALL; e.g.

        C:\LOTUS>: INSTALL [enter]

        Press [enter] again after the Lotus logo appears.

3) From the Main Menu, choose the "Change Selected Equipment" option.

4) From that menu, choose "Add New Drivers to the Library."

5) When asked from which drive the drivers can be copied, indicate "A"
or "B" depending on which drive the TLI drivers are located.

6) When the program is finished copying the drivers (the disk drive
light goes off), choose "Save the Current Driver Set." You are then
prompted to name the driver set. This can name can be anything you
choose, or if no name is specified, the default name "123.set" will be
assigned.

7) The Lotus INSTALL program will then display three font sizes to
choose from:
                1) Basic
                2) Medium
                3) Extended

        Choose 2) Medium.

8) Answer "Yes" when asked if you want to generate fonts sizes now.

9) After pressing ENTER you are returned to DOS.

10) After returning to the DOS prompt, type

        C:\LOTUS>: INSTALL [enter]

11) Select the "Change Selected Equipment" option again.

12) Choose "Modify the Current Driver Set" option.

13) Select "Text Display."

14) Select the desired driver.

15) After returning to the submenu, select "Graphic Display."

16) Select the desired driver.

17) After returning to the submenu, choose "Return to Previous Menu"
and choose "Save the Current Driver Set."

18) Choose an arbitrary name for the driver set just defined or let
the program default to "123.set".

19) Press ENTER to move to the next menu and select the size of the
font (medium is recommended).

20) Answer "Yes" when asked if you want to generate fonts sizes now.

21) Press ENTER to go to DOS and start Lotus using the name of the
defined driver set.



LOTUS 1-2-3 VERSION 2.2
-----------------------

The following are generic instructions for the installation of TLI
text and graphics drivers for Lotus 1-2-3 Version 2.2. Lotus should
first be installed for normal VGA and it is suggested that normal
operation be assured before loading TLI extended mode drivers

1) Copy the files from the Lotus Driver Diskette to your Lotus
directory.

2) Enter Lotus INSTALL; e.g.

        C:\LOTUS>: INSTALL [enter]

3) From the Main Menu, select "Advanced Options".

4) From the Advanced Options menu, select "Add New Drivers to
Library".

5) After returning to the Advanced Options menu, select "Modify
Current Driver Set", which then brings up the configuration menu.

6) From the configuration menu, select the "Text Display" option, and
then select the desired driver.

7) After returning to the configuration menu, select the "Graphic
Display" option, and then select the desired driver.

8) After returning to the configuration menu, select "Return to menu".
This returns you to the Advanced Options menu.

9) From the Advanced Options menu, select "Save Changes". Assign an
arbitrary name to the driver set or let the program default to the
123.set driver set name. This brings you to the Exit menu.

10) From the Exit menu, select "Yes" to leave Install.
